UBI EasyCoder 401 Linerless – Installation Instructions
1
PAPER CUTTER KIT
The paper cutter is factory fitted on the EasyCoder 401 Linerless
Cutter model (EC 401 LLC) and can be fitted as an option on the
EasyCoder 401 Linerless Tear-Off model (EC 401 LLT) which
thereby is upgraded to EC 401 LLC standard.
The cutter can easily be opened for paper load and cleaning.
The linerless paper cutter is intended to cut through continuous
linerless paper strip and is thus provided with a cutting mechanism
designed to cut and feed linerless paper without the adhesive
sticking to the various parts. The cutter has a built-in label-taken
sensor/jam detector, and a safety switch that prevents it from
operating when the anvil shear is open.
The cutter kit consists of:
• One Linerless Cutter Unit
• One Guide Plate
• This Installation Instructions leaflet
Maximum paper thickness is 175
µ
m (
≈
175 grammes/m
2
) for
paper-based linerless materials.
The Paper Cutter increases the printer’s total weight by approx. 1.0
kgs (=2.2 lbs) and its length by 28 mm (1.1") without the guide plate
and 58 mm (2.3") with the guide plate fitted at the front of the cutter.
Description
UBI EasyCoder 401 Linerless
Paper Cutter Kit
Installation Instructions
Edition 1, November 1996
Article No. 1-960424-00
Information in this manual is subject to change without prior notice
and does not represent a commitment on the part of UBI Printer AB.
© Copyright UBI Printer AB, 1996. All rights reserved. Published
in Sweden.
EasyCoder is a trademark of United Barcode Industries (UBI).
Torx is a registered trademark of Camcar Division of Textron Inc.
Power
Ready
Error
-
