Ubiquiti GBE, Quick Start Manual

7. 2. 2020

GBE Quick Start Guide

https://dl.ui.com/qsg/GBE/GBE_EN.html

1/18

GBE

Ball Joint Mount

Lock Ring

Metal Strap

Gigabit PoE (24V, 0.5A) with

Mounting Bracket

Power Cord

Package Contents

Installation Requirements

Clear line of sight between GigaBeam AP and station
Pole-mounting: 7 mm socket wrench or screwdriver
Wall-mounting: wall fastener (not included)
Shielded Category 5 (or above) cabling with drain wire should be used for all wired
Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor
environments and destructive ESD events with industrial-grade, shielded Ethernet
cable from Ubiquiti. For more details, visit 

ui.com/toughcable

Surge protection should be used for all outdoor installations. We recommend that
you use two Ethernet Surge Protectors, model ETH-SP-G2, one near the device
and the other at the entry point to the building. The ETH-SP-G2 will absorb power
surges and safely discharge them into the ground.

Note:

 For guidelines about grounding and lightning protection, follow your

local electrical regulatory codes.

GBE Quick Start Guide