UIS WDT-110 User Manual Download

Page: 1 / 4

Wireless DI Transducer User's Manual

Product Name:

Wireless DI Transducer

Model No:

WDT-110

Input Power:

3V DC

Features Description:

1. To wireless transmission (opens / closes) the Dry contact signal to the repeater can be provided

with a wide range of Alarm Dry contact connected to the Sensor Products.

2. Use CR2032 type Li-ion batteries, battery power is insufficient to inform the host will

automatically operate a very low power, the battery can be used for more than one year and a

half.

3. Due to spill-resistant design for the case, so to replace batteries, the need to remove screws and

opened case.

4. Easy link, Linked with the post-instrumentation wiring ready, when install at the first time to

press the set button on the side of product binding with repeater.

5. WDT-110(Wireless DI Transducer) has a magnet base, can be adsorbed on the iron outside the

box.

Foundation stop plate

can be fixed on the pillar approach.

Outline Dimensions:

Feature Locator:

Foundation stop plate

2. State of LED window

3. Outlet

wires

4. (SET) Setting button

Summary of Contents for WDT-110

Page 1: ...y low power the battery can be used for more than one year and a half 3 Due to spill resistant design for the case so to replace batteries the need to remove screws and opened case 4 Easy link Linked...

Page 2: ...detectors devices as an example the wiring diagram that is as follows 4 The WDT 110 Wireless DI Transducer input signal properly then after the loop and then press the SET button of WDT 110 Then press...

Page 3: ...ser between both distance tests to have a look first whether to have the improvement segment condition Specification Wireless DI Transducer Model No WDT 110 Electrical Specification Transmit Frequency...

Page 4: ...ipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CAUTION A...