How do I set up my WONDERBOOM?
Bluetooth
Out of the package, WONDERBOOM is ready to pair with your first Bluetooth device. Here’s
how:
Turn the speaker on by pressing the power button on the top of the speaker. The power indicator
will glow white, and the Bluetooth connect button (above the ULTIMATE EARS LOGO) will
blink white rapidly.
On your Bluetooth device, go to the Bluetooth menu and scan for devices (make sure Bluetooth
is enabled).
Select WONDERBOOM from the list of devices.
Once paired and connected, you’ll hear an audible confirmation from the speaker. This means
your WONDERBOOM is ready to use. You can pair additional devices with your speaker.
Q: How do I use my ULTIMATE EARS speaker with a computer?
A:
You can connect your ULTIMATE EARS speaker to a Mac or PC that has Bluetooth
capabilities. Connect to Mac
Turn the speaker on.
If this is the first device you’re pairing to your ULTIMATE EARS speaker, it’s ready to pair.
Otherwise, hold down the Bluetooth button until you hear a tone. The Bluetooth connection
button will blink rapidly, indicating the speaker is ready for pairing.
From the Apple menu, select System Preferences.
Open the Bluetooth preference pane.
Find and select your ULTIMATE EARS speaker in the Available Devices list, and then click
Pair.
Connect to PC
Turn the speaker on.
If this is the first device you’re pairing to your ULTIMATE EARS speaker, it’s ready to pair.
Otherwise, hold down the Bluetooth button until you hear a tone. NOTE: The Bluetooth
connection button will blink rapidly, indicating the speaker is ready for pairing.
Open the Control Panel.
