![background image](http://html1.mh-extra.com/html/uni-bond/lw4422h/lw4422h_installation-instructions_3675617001.webp)
Uni-Bond Lighting & Safety Products Canada Inc
July 2018
LW4422H LED Work Light with heated lens.
Voltage: 9V - 36V
Wiring:
Black - Ground (-)
Red - Power (+)
LW4422H is equipped with Automatic Lens Heater, which helps to reduce ice and snow build up. Lens heater will turn
on automatically when the light is turned on and will stay on until internal temperature of the light r 50° C.
Green indicator light will be lit when heating element is on. It will take a few minutes for the lens to heat up and melting
to commence. Outside temperature, thickness of ice & snow, etc. can slow the heating process.
Light becomes hot under continuous use. Be cautious of hot surface when touching the light.
Please keep heat-sink clean and exposed to maintain air flow.
Wire from Power Source should be fused with a 7.5 Amp Fuse (not included)