565 Brea Canyon Rd., Ste A, Walnut, CA 91789, USA
Phone: 626.964.7873 Fax: 626.964.7880
www.unicomlink.com e-mail: info@unicomlink.com
@ UNICOM 2013. UNICOM is a trademark of UNICOM Electric, Inc. All rights reserved.
Specifications subject to rev030813 UNILT031505 change without notice.
Dyna-Switch/24
FEP-31024T-3
24 Port 10/100Base-TX Fast Ethernet Switch
Features
Complies with IEEE802.3 and IEEE802.3u standards
Complies with IEEE802.3/802.3u auto-negotiation
Supports IEEE802.3X flow control for full duplex and back pressure flow control for half duplex
Support auto MDI/MDI-X crossover detecting and auto correction
Supports Link-on & cable length & Link-down Power saving
Supports IEEE802.3az energy efficient Ethernet function
Switching fabric: 4.8Gbps
Packet forwarding rate (in 64 bytes):
10M: 14881 pps
100M: 148810 pps
RoHS compliant
FEP-31024T-3 24 Port 10/100Base-TX Fast Ethernet Switch
Specifications
Interface
MAC Address Table
Buffer Memory
LED Indications
Power
Dimensions
Case
Temperature
Humidity
Safety
EMC
24*10/100 Mbps RJ-45 ports
8K
256K bytes
1*power LED (Power: Green)
24*port LEDs (Link/Act: Green)
Internal power supply
Input 100-240VAC 50-60hz
267*161.5*42 mm
10.6*6.4*1.7 inch
Metal
Operating: 0°C ~ 40°C (32°F ~104°F)
Storage: -40°C ~ 70°C (-40°F ~158°F)
Operating: 10% ~ 90% RH, non-condensing
Storage: 5%~90% RH, non-condensing
CE, LVD
FCC, CE Class A
Part Number
Description
U
nicom’s Dyna-Switch/24 is the affordable and efficient way
to upgrade your network. With 10/100Mbps ports, the Dyna-
Switch/24 offer everything a small office environment would
need in a convenient, desktop package.
This switch will fit neatly on a desktop or can be rack mounted
with the included mounting brackets. The powerful Dyna-
Switch/24 has dedicated 10/100Mbps bandwidth and the
full-duplex operation mode effectively doubles the band-
width for each port. This can increase the bandwidth of
10Mbps Ethernet port and the 100Mbps fast Ethernet port to
20Mbps and 200 Mbps, respectively. To enhance the packet
transmission, this switch support IEEE 802.3 full-duplex flow
control and half-duplex back pressure congestion control.
Most hubs and switches are designed with one uplink port to
cascade other hubs or switches. Now, the Micro-Switch/5
supports new MDI/MDIX technology - each port can be either
a normal port or an uplink port offering an automatic cross-
over function to either 10Base-T or 100Base-TX allowing you to
use either a pin-to-pin or crossover cable with no worry.
*Automatic MDI/MDIX Crossover
