USER MANUAL(UG - 230)
Double Safety System Against Fire
Electric Shock Prevention System
Human Detection System
Imaginary Code System to prevent
exposure secret code
1. To touch [Numeric Keypad]
Touch the [Numeric Keypad]
2. To enter the secret code
Double security mode
Success : "Biriri"
Success : "Biriri"
Press [*] button after enter the secret
code being light on all the numerickey pad
The secret code should enter after numeric lamp turns on,
and if numerice lamp off during entering code, then
please touch [Touch Keypad] and enter secret code again.
After wrong codes are entered 3times in a the keypad will
become inactive for half a minute with a alram "Biriri Biriri Biriri"..
Press [*] button after
enter the secret code being
light on all the numeric keypad
The light comes on any 3 numeric
button, then just press them regardless
in oreder
Fail : "Biribiri"
Fail : "Biribiri"
"Bibi"
CAUSION
Note
"Biriri"
Normal mode
Warning
For safety precaution is to ensure the safety of the user
due to accident, property damage and prevent inconvenience.
Please should read before use it.
Do not clean the product with flammable
materials such as alcohol, benzene or
thinners. Such materials may damage the
surface or cause a fire.
Pleae change all the batteries within 7 days
after hear first melody to change battery.
Product composition may be subject to change depending on the installation environment.
Note
"Biririk"
"Biriririk"
"Bibi"
"Biriri"
Close the door by Electronic
1. Press [Register] Button
3. Finish to Register
Close the door by Mechanical
Open the door by Electronic
Open the door by Mechanical
Press [Open/Close] button to open
being deadbolt locked
Turn manual knob
to open being deadbolt locked
Press [Open/Close] button
to lock the door in manual mode
after closed the door
Press [Register
]
button shortly after
open the battery cover.
Press [Register] button to set on
Turn manual knob
to close after the door closed
User Manual/ Product Warranty / Installation
Template / AA LR6 Battery 4pcs / Screw
As this is a keyless digital door lock, damage may occure to parts of
the dead lock system if it is not used according to the manual,
Users should be fully aware of the manual and how to operate this
product.
Touch registered the digital key or the smart tag at the touch plate or tag touch
point where on the front ass'y
The product set to double security mode from origianlly purchased.
Please refer "how to set double security mode" if you want to change
normal mode.
Back Ass'y
Sensor Ratch
Deadbolt
Manual Knob
Press [Register]
button shortly afte
open the battery cover.
Enter a new secret
code(3~20 digits)
Press [Register]
button to set on
Open/Close Button
Auto/Manual
Switch
Volume Switch
Register Button
Double Lock Button
For the Emergency use : if Open/Close
button is not working, then just turn to
open by finger
Press slightly battery cover and push to the direction of the arrow to open.
please use secret code over 6 digits to prevent exposuresecret code
(Can be used the numeric 0 ~ 9 only).
Do not exposed secret code to any 3rd person. For this, you
should change secret code regularly.
Automatically delete existing secret code after registering a
new secret code
You should check what a new secret code is register
properly or not before close the door.
It can be registered several smart tags, you should touch
continuously smart tag within 7second after starting to register
first digital smart tag, and it will set up automatically after 7 seconds.
To confirm the register properly or not with the door open.
It will be automaticall deleted all existing digital keys or smart tags if register
new one, therefore you should register in once time up to 50pcs each of them
The secret code can register between 3 to 20 digits and 1 secret code can use
Strike & Strike Spacer
Mounting Plate
CAUSION
Touch registered the dingital key or smart tag key on the teg
touch point affer that door open you may open
To Open theDoor From Outside
(Smart Tag)
1. Press [Register] Button 2. Enter a New Secret Code 3. Finish to Register
If the smart tag have problem with automatic recognition
on the touch plate, then please touch again after Touch Keypad
Caution for Safety
Do not disassemble or alter the lock.
Do not install where the distance over
5mm between the door and door
frame.
Please do not expose the secret code
and change the secret code in regularly.
Batteries should npt be exposed
directly to heat sources or flames, or
submerged in water, because they may
leak or explode, resulting in severe
damage. Please do not use damaged
batteries.
Do not press using sharp tools or press
numeric button excessively
Please do not mix old with new batteries or
use different types.
Always use new alkaline batteries.
Please make sure the batteries are inserted
cor/-) as indicated in the battery
component. Otherwise, it ay cause a leaks
or explosions.
Product Composition
To Open/Close the Door From Inside
Specification(Front Ass'y)
Specification(Back Ass'y)
Register Secret Code
To Register Digital Key / Smart Tag
Note
To Open the Door From Outside (Secret Code)
Diecasting Alloy
High Quality Individual Lighting
Touchpad
Double Security System
To Open the Battery Cover
UG-230 :
Secret Code + Digital Touch Key (2W)
UG-230S :
Secret Code + Smart Card (2W)
UNICOR HIGHTECH CO., LTD
www.unicor.co.kr
UG230S
UG230
Front Ass'y
Front Ass'y
Success : "Biriri"
Fail : "Biribiri"
Numeric Keypad
Emergency power
supply Terminal
Touch
Point
2. Touch Digital Key or Smart Tag
Touch the digital key or smart tag at the
touch plate or touch point
