background image

To prevent serious injury and DEATH:

1.  Leaving gun unsecured MAY RESULT 

IN CRIMINAL CHARGES.

2.  Even when stored in gun safe, 

use gun-lock to disable gun.

3.  Unload gun completely, including 

chamber, before storing. 

4.  Separate gun safe keys from other keys.
5.  Lock up guns and ammunition separately out 

of children’s reach and out of sight.

Visit our website at: http://www.harborfreight.com

Email our technical support at: productsupport@harborfreight.com

To ensure security of your safe, Union Safe Company 

does NOT provide replacement keys.

Made by Safewell for Union Safe Co

.

Owner’s Manual & Safety Instructions

Save This Manual

Keep this manual for the safety warnings and precautions, assembly, 

operating, inspection, maintenance and cleaning procedures.  Write the product’s serial number in the 

back of the manual (or month and year of purchase if product has no number). Keep this manual and the 

receipt in a safe and dry place for future reference. 

22h

When unpacking, make sure that the product is intact 

and undamaged.  If any parts are missing or broken, 

please call 1-888-866-5797 as soon as possible.

Copyright

©

 2021 by Harbor Freight Tools

®

.  All rights reserved.  

No portion of this manual or any artwork contained herein may be reproduced in 

any shape or form without the express written consent of Harbor Freight Tools.  

Diagrams within this manual may not be drawn proportionally.  Due to continuing 

improvements, actual product may differ slightly from the product described herein.  

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Summary of Contents for 59549









Reviews: