background image

Input-Output Device

 FD7203

TYPE

1 input / 1 output

Instruction Manual 09-7203-09-19

1293-CPD-0282

General Description

The Input-Output device FD7203 (fig.1) is designated to produce and send an electrical signal

to various devices in case of occured events and recording external impacts, typical for a fire

condition events.The device is compatible with addressable fire control panels IFS7002,

supplementing the possibilities of the addressable systems of series IFS7000.

The device consists of a printed board with elements, 

mounted on a plastic base and closed by a cover .The 

base has an implemented terminal bus (pos.7 and pos.6, 

fig.1) through which cabels connect the addressable loop, 

the power supply and etc.

Communication between Control Panel IFS7002 and the 

input-output device is realized by means of the 

addressable loop through a specialized protocol for data

exchanging UniTALK .

Two LED indicators are built-inon the device PCB (pos.1 

fig.1), illuminated in yellow  and red (pos2.fig.1) light,

providing device status information.

1

2

3

4

5

6

7

Fig.1 - Picture of input/output module

Теchnical Data

Аddressable loop:

 

- supply voltage                   

 

 

   

 

             (15÷30)Vdc

 

- current consumption in duty mode  

 

 

             < 350µA

 

- current consuption in alarm state   

 

 

             (2±1)mA

Input:   

 

                                                        

                           1 pc.

 

- “Fault condition” - interruption 

 

 

 

              R

line

>25kΩ

 

- “Fault condition” - short circuit 

       

 

                            R

line

≤2,2kΩ

 

- “Duty mode” range   

 

 

 

                            5,7kΩ≤R

line

<15kΩ

 

- “Activated input” range (fig.3b) 

  

 

                            2,2kΩ<R

line

<5,7kΩ 

 

- “Activated input” - input does not check for short  

 

0kΩ<R

line

<5,7kΩ

 

  circuit (fig.3a)

Output: Depending on the configuration and the power supply                1 pc.

 

(Relay or monitored)

• Relay

 

- type   

 

 

                                       

             potential free,

 

 

 

 

 

 

 

                                         switching functions

 

- electrical specifications 

 

 

 

 

            30V DC /1A, 125V AC/0,5A

or

• Monitored

 

- type    

 

                                                 

 

            potential

 

- electrical specification   

     

                          

            (12÷30)Vdc

 

- peak activation current                         

           

            400mA

Degree of protection:  

 

 

 

 

 

            

IP 

30 

Operating temperature range 

 

                            

            from minus 5°С to 40°С

Relative humidity resiatance (no condensation)   

 

            (95±3) % at 40°C

Dimensions   

 

 

                                        

            (90x66x22) mm

Weight 

 

 

 

                                   

 

            0.075 kg

09/09.19

Manufacturer: UniPOS Ltd., 47 San Stefano Street, Pleven 5800, Bulgaria,

 http://www.unipos-bg.com

Summary of Contents for FD7203







Reviews: