MS380
Quick Start Guide
Go to your device (phone/tablet/computer) settings and
turn the Bluetooth function on.
The MS380 will appear on your device as “Wireless
Scanner” or simply “Wireless”
Select/Press “Wireless Scanner”
Turn Bluetooth on
Step 3:
Scan the Plug and Play barcode
Scan Plug and Play
Step 2:
Plug and Play
These steps will enable a direct connection with the MS380, without
the cradle. First, scan here to activate cradle-less mode.
Begin pairing
Step 1:
Cradle-less Mode
Scan HID barcode.
Scan HID
Step 2:
HID
Scan cradle
Scan the barcode located underneath the MS380 cradle. Your
scanner is now paired and ready to use.
Step 3:
Scan here to begin pairing the MS380 using the cradle.
Begin pairing
Step 1:
Cradle Mode
Plug the power supply cable into the MS380 cradle and into an
electrical outlet. Plug the USB cable into the MS380 cradle and into a
free USB port on your host computer. Charge for 4-5 hours.
Connect Cables & Charge
Scan the pincode sequence provided by your host using these barcodes.
Numeric Barcodes
Step 5:
Scan the Pincode Start barcode.
Pincode Start
Scan Pincode Start
Step 4:
The Unitech MS380 Bluetooth Scanner
Installation Instructions & Popular Configuration Settings
SETUP AND INSTALLATION
The following steps will show you how to pair your MS380 to a host
device (smartphone/tablet/computer) both with and without the cradle.