background image

USAutomatic 

 

7 Day Programmable Timer 

Solar Friendly

 

Part # 550015 

Programming Instructions and technical data 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Supply voltage 12 to 24 volts dc 

Standby current 1 ma 

Operating current 1 ma 

3 wire harness included 

Open collector output 

Back up rechargeable battery type B40H 

Dimensions 2.375” x 2.375” 

 
 
 
 
 

USAutomatic, LTD 118 Hillside Drive, Lewisville, TX 75057 

www.usautomatic.com

 

 

Safety Warning

 – This device when directly connected to an automatic gate or door will activate device 

when programmed to do so. Proper safety precautions MUST be taken to prevent injury to people, 
property or animals that might be in the area when device is activated. USAutomatic recommends safety 
devices such as contact sensors, photo beams and motion detectors on all installations. In addition visual 
or audible devices may also be used to provide warning to persons or animals in the area. 

 

Summary of Contents for 550015

Page 1: ...e Lewisville TX 75057 www usautomatic com Safety Warning This device when directly connected to an automatic gate or door will activate device when programmed to do so Proper safety precautions MUST be taken to prevent injury to people property or animals that might be in the area when device is activated USAutomatic recommends safety devices such as contact sensors photo beams and motion detector...

Page 2: ...hing Press the key 8 01 off should be flashing Press the Y key to enter the 01 off program mode 9 Use or key to set hour Press the Y key 10 Use or key to enter the minutes Press the Y key 11 Use the or key to set the day to execute program Press the Y key 12 Press the N key to exit program mode or wait 5 seconds Example Program Example this will set gate to open at 7 15 am and then close at 7 30 p...

Page 3: ... at 19 00 and it is 12 00 The timer should be executing the program and displaying the PROG with empty light bulb to the left Pressing the N key until mode changes to PROG and half full light bulb to the right will temporarily turn timer OFF The timer will stay OFF until 7 00 cycles back around Menu contents To view menu items press the Y button and the menu will appear on the right side of the di...

Page 4: ...ard The timer only holds the gate or door open overriding any automatic close function of the gate or door control board If you toggle the timer to the always ON mode the gate or door would always be open If you toggle the timer to the always OFF mode the gate or door will operate as if no timer is present If you toggle the timer to the PROG mode it will execute the events programmed This product ...

Reviews: