background image

 

 

 

1 of 2

P/N 1069136B • REV 2.00 • ISS 04MAY11

Description 

The TruVision TVD-DOME-HR camera is a high-resolution 
dome camera that that can be used in retail, commercial, and 
residential environments.  The camera uses a varifocal lens 
and offers custom configurability. 

 

Safety precautions 

Read this installation sheet in its entirety before using the 
camera. 

To avoid dangerous electrical shock or damage to the 
equipment, do not try to disassemble the camera or any of its 
components. 

Do not attempt to service this camera by yourself unless you 
are authorized to do so. Opening the cover may expose you to 
dangerous electrical shock or other hazards. Only a service 
technician should perform this procedure. 

Never point the camera at the sun and do not expose the lens 
directly to the sun or strong light as this may damage the 
camera. 

Handle the camera with care. The camera contains sensitive 
components, avoid any shock or impact to the camera. 
Improper handling can damage the camera. 

The camera is designed for indoor use. Do not use the camera 
when the temperature is lower than 

10

C (14°F) or higher 

than  +50

C (122°F). For safe camera usage, the maximum 

humidity should not exceed 85%. If the camera is placed in an 
extremely dusty location, special housing may be needed to 
protect the camera and lens. 

 
Installation 

Before installing the TruVision TVD-DOME-HR camera, make 
sure that the location is mechanically sound, protects the 
camera, and affords the required views. Once the camera is 
securely mounted, follow the procedure below to connect the 
camera. For power and video connections see Figure 1 below. 
For camera dimensions see Figure 2 and Figure 3 on page 2. 

Figure 1: TruVision Dome camera power and video connections 

 

To install the camera: 

1.  Fasten the camera to a wall or ceiling (or another solid 

surface). The camera must be stable when connected. 

2.  Connect the 75 

 coaxial cable to the video output. 

3.  Connect the power cable to the camera. 

4.  Adjust the camera position and angle as required. 

Camera dimensions 

Figure 2: TruVision Dome dimensions - base attachment 

 

TruVision TVD-DOME-HR Camera 
Installation Sheet 

Reviews: