Supports different Ethernet & fiber ports combination
(with optional ST/FC/SC/SFP slot)
Supports IGMP Snooping & GMRP multicast packets filter
Supports port-based VLAN, IEEE 802.1Q VLAN & GVRP protocol
Supports QoS(IEEE 802.1p/1Q) & TOS/DiffServ
Supports stp/Rstp, SNMP V1/V2/V3
Supports RMON, improves network monitor forecast ability
Supports UT-Ring(includes single ring & intersecting ring)
Supports port mirroring, convenient for online debug
Supports port transmission limitation, broadcast storm, multicast
storm, uncertain unicast storm suppression
Supports power, port, temperature, UT-Ring abnormal status relay
output alarm
Supports operating temperature -40
~85
1
3
2
UT-62408F Series
Managed Ethernet Switch
User Manual
UT-62408F series are managed industrial Ethernet switches. It supports
various combinations of fast Ethernet RJ45 & fiber ports, which up
to 12 ports (contains 4 Gigabit fiber ports). This switch supports port
mirroring, VLAN, igmp, QoS, stp/Rstp and other layer 2 management
modes, such as Console, Telnet, Web, SNMP & relay output. these make
the switch works stable under poor environment, which provides safe
and reliable solution for industrial automation, intelligent transportation,
video monitoring, and other industrial application networking access.
Here take UT-62408F-8T4SC-BNF real panel & top panel as example:
RJ45 ports support auto MDI/MDI-X, it can be connected with PCs,
servers, other switches or hubs by MDI. When use MDI connection,
relative pin 1, 2, 3, 4, 5, 6, 7, 8 to be connected directly. For MDI-X
port of switch or hub, it adopts cross connection: 1->3, 2->6, 3->1,
6->2. 10/100Base-T(X) MDI/MDI-X pin assignment is as below:
1
2
3
4
5
6
7
8
9
10
12
11
1. Alarm indicator
2. Power input indicator
3. System running indicattor
4. Default setting
5. Console port
6. 10/100Base-T(X) Ethernet port
Dimension(Unit:mm)
Transmission Distance
Cat. 5e: 100m
Fiber module
Single-mode: 1,310nm 20/40/60Km
1,550nm 20/40/60/80/100/120Km
Multi-mode: 1,310nm 2Km
Switching Performance
Forwarding rate:
100M ports: 148,810pps
1000M ports: 1,488,095pps
Transmission mode: store-and-forward
MAC address buffer: 8K
Switching bandwidth: 9.6G
Power Requirement
Voltage input: 12/24/48VDC(10.8~52.8VDC), supports redundant dual power input
Power Consumption
Max. input power consumption: 625mA@24Vmax(check details on label)
Mechanical Characteristics
IP rating: IP40
Weight: <2000g
Installation: DIN-Rail
Dimension
Size
W
H
D
: 70mm
150mm
100mm
Environment
Operating temperature: -40 ~85
Storage temperature: -40 ~85
Relative humidity: 0~95% (non-condensing)
Industrial Standards
EMI
FCC Part 15 CISPR (EN55022) class A
EMS
IEC(EN)61000-4-2(ESD)
IEC(EN)61000-4-3(RS)
IEC(EN)61000-4-4(EFT)
IEC(EN)61000-4-5(Surge)
IEC(EN)61000-4-6(CS)
IEC 60068-2-27(Shock)
IEC 60068-2-32(Freefall)
5.1 10/100Base-T(X) Ethernet port
This series switch 10/100Base-T(X) ports support auto MDI/MDI-X.
User can build the connection between RJ45 port of switch and other
Ethernet terminal devices via cable (direct or cross connection). RJ45
pin assignment is as below.
RJ45
8
1
RJ45
8
1
Ethernet cable
7.10/100Base-T(X) Ethernet port status indicator
8.100/1000Base-(F)X fiber port
9.100/1000Base-(F)X fiber port status indicator
10.DIN-Rail
11.Ground screw
12.Power & relay alarm terminal block input
