Installation instructions
Heat pump dryer
Multi-family building
J173.113-0
6.4.11 ITH
1
These installation instructions apply to the model:
173
The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order
specified.
Validity
Transport
The appliance is only to be transported in the upright position! Transporting it in any other position will result in damage to the
appliance! When carried carefully, without being shaken, the appliance may be tilted to the left by a maximum of 90° (viewed
from the front).
The appliance must be allowed to stand in the standard operating position for about 2 hours before using the heat pump. Failure
to observe this can result in damage to the appliance.
Front
Front
Front
Back
Front,
upside down
Side
Use a stairclimber
to avoid knocks!