background image

© 2014 Vaddio - All Rights Reserved.  Document Number 342-0756 Rev A

 

 

 

V

ADDIO

 

B

ASE

STATION™ 

Group Collaboration Appliance for Small or “Huddle” Conference Rooms 

 

Part Numbers:   

999-8920-000:  BaseSTATION Deluxe System with Premium Wall Mount (North America) 
999-8920-001:  BaseSTATION Deluxe System with Premium Wall Mount (International) 
 
999-8925-000:  BaseSTATION Premier System, Premium Wall Mount, and PC to Dock Interface Cable (NA)   
999-8925-001:  BaseSTATION Premier System, Premium Wall Mount, and PC to Dock Interface Cable (Int’l)   
 
 

  BaseSTATION Camera Module 

 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

       

BaseSTATION Dock, Controller/Dialer and PC Interface                              Premium Wall mount with Integrated Cable Tray 

 

 

 

 

 

 

 

 

             (Included with BaseSTATION Camera Module) 

 

 

 

 
 
 
 
 
 
 

 
 
 
 

 

Accessory

 

999-8902-000:  BaseSTATION Dock 4x4 PC Interface Cable 

(Included with the Premium Package Only) 

 
 
 
 
 
 
 
 
 

BLURB 

Installation and User Guide 

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for BaseSTATION









































Reviews: