background image

 

 

 

   Issue 

 

1 947635 

Issue 2 

 

VIP-120 

ONE-WAY IP CEILING SPEAKER 

 

INTRODUCTION 

The VIP-120 One-Way IP Ceiling Speaker enables 
voice access to a single zone of one-way paging 
over an IP-based LAN/WAN.  This allows a page 
zone extension anywhere on the network.  The 
speaker level is electrically adjusted during set up. 
The enclosure is made of steel with a durable white 
powder coated finish.  Power is provided to the 
VIP-120 via a Power over an Ethernet switch 
meeting the 802.3af specification. 
 

SPECIFICATIONS 

Access Methods 

  PBX, FXO Port w/VIP-811 

  POTS telephone set w/VIP-811 

  PBX, FXS Port w/VIP-821 

  Valcom M Cast Page Group 

  SIP – enabled telephone system 

Features 

  RJ-45 network connection 

 802.3af 

compliant 

  High Efficiency Class-D Amplifier 

 

INSTALLATION 

FCC Information 

This equipment has been tested and found to 
comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules.  These limits 
are designed to provide reasonable protection 
against harmful interference when the equipment is 
operated in a commercial environment.  This 
equipment generates, uses and can radiate radio 
frequency energy and if not installed and used in 
accordance with the instruction manual, may cause 
harmful interference to radio communications.  
Operation of this equipment in a residential area 
may cause harmful interference in which case the 
user will be required to correct the interference at 
his own expense. 
 

 
 
 

 
 
 
 
 
 
 
 
 
 
DIMENSIONS/WEIGHT 

  13.00” Dia x 3.00” D 

      (33.02cm Dia. x 7.62cm D) 

  Weight: 2.5 lbs (1.13 kg) 

 

Environment

 

Temperature:                                    0 to +40° C 
Humidity:     

           0 to 85% non-precipitating 

 

Precautionary Designations 

CAUTION:  To reduce the risk of electric shock,

 

Do not remove cover.

 

No user serviceable parts inside.

 

Refer servicing to qualified service personnel.

 

CAUTION

 

RISK OF ELECTRIC SHOCK

 

DO NOT OPEN

 

This symbol indicates that dangerous

 

voltage constituting a risk of electric

 

shock is present within this unit.

 

This symbol indicates that there are

 

important operating and maintenance

 

instructions in the literature accompanying

 

this unit.

 

 

Packing List 

Qty. Item 

1 VIP-120 
1 VSP 

Document 

1 RJ-45 

Patch 

Cable 

 

Reviews: