background image

 

 

   

 

 

1

 

 

947734 

                   Issue 2   

                                  IP PoE Double Sided Digital Clocks 
      VIP-D425DS, 4 Digit, 2.5” Display, VIP-D440DS, 4 Digit, 4.0” Display 
      VIP-D625DS, 6 Digit, 2.5” Display, VIP-D640DS, 6 Digit, 4.0” Display 

 

 

INTRODUCTION 

The VIP-D425DS 4 Digit, 2.5 inch, VIP-D440DS 
4 Digit, 4.0 inch, VIP-D625DS 6 Digit, 2.5 inch, and  
VIP-D640DS 6 Digit, 4.0 inch Clock Displays enable 
time indication, synchronization, and correction over 
an IP-based LAN/WAN. This allows locating a clock 
display anywhere on the network. Clock 
synchronization is initiated via connection to any 
NTP (Network Time Protocol) server. The enclosure 
is made of steel with a durable powder coated 
finish. The color of the enclosure can easily be 
changed to match any décor.  Power is provided to 
the digital clocks via a Power over Ethernet (PoE) 
switch meeting the 802.3af specification.  Only one 
network connection is required, supplying power 
and data to both clock displays.

 

 

SPECIFICATIONS 

Features 

 

Easy to read, high visibility Red 2.5” or 4.0” 
digits display hours and minutes 

 

Selectable 12 or 24 hour format  

 

802.3af Power over Ethernet (PoE) compatible  

 High 

Efficiency 

 

DIMENSIONS/WEIGHT 

 

VIP-D425DS: 11.50” L x 4.25” W x 5.50” H 
(29.21cm L x 10.80cm W x 13.97cm H) 
Weight: 5.9 LBS (2.68 kg) 

 

VIP-D440DS: 17.38” L x 4.25” W x 6.85” H 
(44.15cm L x 10.80cm W x 17.40cm H) 
Weight: 9.1 LBS (4.14 kg)  

 

VIP-D625DS: 16.12” L x 4.25” W x 5.50” H 
(40.94cm L x 10.80cm W x 13.97cm H) 
Weight: 7.3 LBS (3.32 kg) 

 

VIP-D640DS: 25.25” L x 4.25” W x 6.85” H 
(64.14cm L x 10.80cm W x 17.40cm H) 
Weight: 12 LBS (5.45 kg) 
 

 

 
 
 
 
 

 
 
Nominal Power Requirements 

 

802.3af 

PoE 

   Class 

 

 

Environment

 

Temperature:                                    0 to +40° C 
Humidity:     

           0 to 85% non-precipitating

 

 

Packing List 

 
INSTALLATION 

FCC Information 

This equipment has been tested and found to 
comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable 
protection against harmful interference when 
the equipment is operated in a commercial 
environment.  This equipment generates, uses 
and can radiate radio frequency energy and if 
not installed and used in accordance with the 
instruction manual, may cause harmful 
interference to radio communications.  
Operation of this equipment in a residential area  
may cause harmful interference in which case 
the user will be required to correct the 
interference at one’s own expense.

Qty. Item 

Double Sided Digital Clock 

Mounting Bracket W/ Hardware 

1 VSP 

Document 

Reviews: