EXTREME DUTY TPMS - Sensor Installation
Quick Use Notice
Please Read Before Installation
‣
Handling of tires and rims should be carried out only by workers who have received training
and accreditation based on instruction from a qualified work supervisor.
‣
Check the “Tire and Rim Handling Manual” published by the tire manufacturer for
information on work and inspections, etc. involving tire handling.
‣
When lifting heavy components or equipment, make sure that you use suitable lifting
equipment and that you follow the instructions in the manual for equipment to be used.
‣
When moving tires and rims, be careful to avoid accidental drops or falls that could injure
others in the vicinity.
‣
There are several types of tools for work involving tire and rim handling. Be sure you have
proper understanding of how the tools are used and carry out the work in accordance with
proper procedures.
‣
Be sure to perform a visual examination of tires and rims when conducting regular
inspections of vehicles and tires or tire rotations.
‣
Rim components that are deformed, bent, cracked, worn, corroded, or damaged should be
clearly labelled to indicate their condition, and discarded.
‣
Use tires and rims suited to the vehicle, as specified by the vehicle manufacturer and tire
manufacturer.
‣
In the case of dual assemblies, DO NOT operate the vehicle on a single tire as the load
capacity of the tire and rim will be drastically reduced and may result in damage.
1-800-568-9188
4320 Harvester Rd., Floor 2
Burlington, ON, L7L 5S4, Canada
