Note: This kit must be installed
by a quali
fi
ed installer, service
agency or gas supplier at the time
of the heater installation. These
instructions are to be used in
conjunction with the
fi
replace
main installation instructions.
INSTALLER
Leave this manual
with the appliance.
CONSUMER
Retain this manual
for future reference.
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
Depth
15/16”
[24 mm]
15
-1
3/
16
”
[4
01
m
m
]
51-1/16” [1296 mm]
8-
9/
16
”
[2
18
m
m
]
Left hand
door
Cover
plate
Barrier
screen
Right
hand door
CIK assembly
1700
engine
The 1730 Clean Installation Kit installs at the time of
framing the appliance. Wall
fi
nishes are then applied and
butted directly up to the outer frame.
This kit is not intended to and
cannot be installed with
any other trim.
See appliance installation manual for more
information about finishing around this kit.
WARNING
HeatShift System IS REQUIRED when
installing the 1730CIK Clean Install Kit.
Overview
1730CIK Clean Install Kit
Use with Valor L2 1700 Heater Models ONLY (series K or later)
INSTALLATION MANUAL
L2 Series
4007975-01
©2019, Miles Industries Ltd.
