Copyright 2011 ValuePoint Networks, Inc. All rights reserved.
1
Network Controller 3500/3550
Quick Start Guide
Firmware Version 1.00.90
Note: To download the current firmware you need your ValuePoint Webstore
account. Please contact sales@valuepointnet.com if you need more
information.
1. Configuring the Controller
1.1. Connect to the Controller:
The default LAN IP Address of the Controller is:
IP: 192.168.1.1
Set you managing computer to:
IP 192.168.1.100
Netmask 255.255.255.0
Or DHCP
Connect the LAN cable, and open a web browser to address 192.168.1.1. Default
Username / Password for the administrator is
Username: “root”
Password: “root”
We recommend changing the default password after the first login.
1.2. Configure WAN settings:
Depending on your broadband ISP, set the Controller to DHCP, PPPoE or Static Address.
1.2.1. WAN DHCP
If your WAN connection is TCP/IP, and you expect the Controller to receive a dynamic
address from a DHCP server, use this setting. This is most common with Cable Modem
service, or if you are connecting the Controller to an existing routed network or T1 router.
Simply select
Express Setup – DHCP Client
1.2.2. WAN PPPoE
If your WAN connection is DSL, or another kind of PPP-based network, use this setting.
