van Aaken Developments USA LLC
4990 Valenty Rd., Suite C
Chubbuck, ID 83202
Phone: (208) 234-5660 Fax: (208) 637-0287
Website: www.vanaaken.com Email: usa@vanaaken.com
van Aaken SmartBox
™
C3.2
Installation
Instructions
Vehicle:
Chrysler Dodge RAM
Engine: 5.9L 6 Cylinder
Year: 2005
Our Website
www.vanaaken.com
has further information on all of our
new
products.
Every effort has been made to ensure that these installation instructions are accurate and complete. If during installation
of your van Aaken SmartBox
™
C3.2 you experience any difficulty please contact your supplier or van Aaken
Developments directly, with the information on where the product was purchased.
The van Aaken SmartBox
™
C3.2
The van Aaken SmartBox
™
C3.2
accurately alters fuel delivery with reference to engine speed and load, giving a
dramatic increase in power and torque throughout the rev-range. The three-position switch gives the user the choice of
easily adjusting the power level from inside the vehicle.
Kit Contents
•
van Aaken SmartBox
™
C3.2
•
Plug-in Wiring Loom
•
Self-adhesive
Velcro
strips
•
Cable Ties
•
Installation
Instructions
•
3 Position Toggle Switch
Installation – A quick explanation
Installation of the van Aaken SmartBox
™
C3.2 is a very simple task that should take less than 5 minutes.
Do not
be put off by the length of the explanation on the following pages. The steps are set out to ensure easy installation and to
help avoid accidental interference with other components.
To install the van Aaken SmartBox
™
C3.2 simply unplug one connection on the vehicle and then plug the van Aaken
wiring harness
between the disconnected vehicle plugs. You must then mount the box using the supplied self-adhesive
strips.
