1
Quick Start Guide for
River
Multi-Head Console
Thanks for purchasing the River system. This is a sophisticated motion controller with a
deep feature set, but if you’re using it primarily for switching between cameras, you
don’t need to delve into the more advanced features described in the full manual. This
guide will take you through the basic setup and operation for multi-camera production.
Setup warnings:
1 - When left unused for long periods, switch power on and allow the River console
warm up for 5 minutes before operating (not a big problem, but advisable).
2 - Do not plug all the heads and River console into a power strip or surge protector, as
these devices limit electrical current and this can cause the heads to underperform or
even stall. Plug directly into the wall or a non-limiting multiplug block.
3 - Make sure you have clearance when tilting the camera to avoid lens damage. If
necessary, set “Tilt Limits” or add an optional riser to the head to increase clearance.
