Wireless Earbuds
User Manual
1.Power on: Open Lid and earbuds boost up autom
atically, or long press MFB for 3s, there is a “power
on”prompt tone.
2.Power off: Put back to case and close lid, earbuds
are automatically off, or long press MFB for 5s, there
is a “power off”prompt tone.
3.Single Click: Left earbuds (L) Volume Down, Right
earbuds (R) Volume Up. There is a beep at maximum
or minimum volume.
4.Double Click: Play/Pause; Answer Call/Hang up
Call; Reject call when on calling mode.
5.Triple Click: Left earbuds (L) Skip Back, Right earbu
ds(R) Skip forward.
6.Voice Assitance: Long press Left(L) for 2s to wake
up Siri with a beep, Long press for 2s to exit Siri with
Product Display
indicator flashes; 75%-100% battery, forth segment
indicator flashes; Full battery, all lights always on.
7.Case charge the earbuds: open lid and case light
indicator is on for 60s; close lid(with earbuds inside),
earbud’s led light is on when charging, goes off
when full battery, light is off when earbud is not
inside.
1.After using for a period of time, the contacts are
oxidized, earbuds cannot be charged or turned on.
First, use alcohol and cloth to clean the contacts and
the two thimbles in the charging compartment to
solve the problem.
2.When you put the earbuds back into the charging
case, they will turn off and start charging; if you take
it out again, they will automatically turn on and pair
with each other automatically.
Notes on Charging
a beep.
7.Game Mode: Long press Right (R) for 2s, prompt
“Beep Game mode”to enter game mode; Long press
for 2s, prompt “Music mode”to enter music mode.
8.Factory Reset: Earbuds on and unconnected, quic
kly click MFB for 5 times to clear paring data, both
earbuds LED lights are on, automatically off after 3s.
Put earbuds back to charging case, close lid, open
lid and connect again.
1.L&R earbuds Pairing: Left and Right earbuds auto
pair, Masterearbud quickly flash when paring succe
ed, slave earbud light goes off.
2.Connect to device: both earbuds light go off when
connected to device. Search for bluetooth name
“VEATOOL MD012”,click and connected.
Bluetooth Pairing Instructions
3.Automatically connect back: After the first connect
ion is successful, earbuds will connect to the last pair
ed phone by default.
1.Power on: Indicator lights flash 3 times.
2.Power off: Indicator lights flash 1 time.
3.Un-connected: master earbuds light flash 1 time
per seconds.
4.Game mode: both earbuds lights are on and do
breathing effect.
5.Low Battery Warning: indicator light flash 1 time
per 3 seconds.
6.Charge the Case: <25% battery, first segment
indicator flashes; 25%-50% battery,second segment
indicator flashes; 50%-75% battery, third segment
Indicator Light Display
Product Display
Earphones Specification
Bluetooth Version: V5.0
Bluetooth Distance: >=10M
Battery: Polymer Battery 3.7V, 50mAh
Charging Time: 1H for Earphones, 1H for Charging Case
Playing Music/Call Time: 5 Hours (depends on music style and volume)
Supporting Protocol: A2DP 1.3/AVRCP 1.6/AVDTP 1.3/AVCTP 1.4/GAVDP 1.3/HFP
1.7 HSP 1.2/SPP 1.2/GATT 1.0
Charging Box: 3.7V,500mAh
Waterproof Rating: IPX5
Working Frequency: 2.402GHz-2.480GHz
