background image

1

  THREE SELECTABLE D.C. RANGES 

 

0 to 10 V, 0(4) to 20 mA, 0 to 50 mA 

  MINIMUM AND MAXIMUM DISPLAY CAPTURE

  LCD, REFLECTIVE OR RED/GREEN LED BACKLIGHTING

  0.48" (12.2 mm) HIGH DIGITS

  OPTIONAL SETPOINT OUTPUT CARD

  OPTIONAL SERIAL COMMUNICATION CARD (RS232 or RS485)

  OPTIONAL USB PROGRAMMING CARD

  OPERATES FROM 9 TO 28 VDC POWER SOURCE

  FRONT PANEL PROGRAMMABLE

  DISPLAY COLOR CHANGE CAPABILITY AT SETPOINT OUTPUT

  NEMA 4X/IP65 SEALED FRONT BEZEL

MODEL RFMP - MINIATURE ELECTRONIC 5-DIGIT PROCESS METER

GENERAL DESCRIPTION

The FLEX MINI Series provides the user the ultimate in flexibility, from its 

complete user programming to the optional setpoint control and communication 

capability. The FLEX MINI accepts a DC voltage or current input signal and 

provides a display in the desired unit of measure. The meter also features 

minimum and maximum display capture, display offset, units indicator, and 

programmable user input. The display can be toggled either manually or 

automatically between the selected displays.

The FLEX MINI display has 0.48" (12.2 mm) high digits. The LCD is 

available in two versions, reflective or red/green backlight. The backlight 

version is user selectable for the desired color and also has variable display 

intensity.

The capability of the FLEX MINI can be easily expanded with the addition 

of  option cards. The setpoint output cards are field installable with programmable 

setpoints. Serial communications capability for RS232 or RS485 can be added 

with a serial option card.

The FLEX MINI can be powered from an optional Veeder Root Micro-Line/

Sensor Power Supply (MLPS), which attaches directly to the back of a FLEX 

MINI. The MLPS is powered from 85 to 250 VAC and provides up to 400 mA 

to drive the unit and sensors. 

INPUT

The FLEX MINI  is a DC Process meter. It features voltage and current input 

ranges, that are selected by the user via a programming jumper and software 

input range selection. The ranges consist of the following: 0 to 10 V, 0(4) to 20 

mA, or 0 to 50 mA. Users should select the appropriate voltage range that 

covers their maximum input.

SAFETY SUMMARY

All safety related regulations, local codes and instructions that appear in this 

literature or on equipment must be observed to ensure personal safety and to 

prevent damage to either the instrument or equipment connected to it. If 

equipment is used in a manner not specified by the manufacturer, the protection 

provided by the equipment may be impaired.

Do not use this meter to directly command motors, valves, or other actuators 

not equipped with safeguards. To do so can be potentially harmful to persons or 

equipment in the event of a fault to the meter.

Bulletin No.  RFMO-G
Drawing No.  LP0655
Released  12/12

Danaher Specialty Products
1-800-390-6405
www.danaherspecialtyproducts.com/Veeder-Root

CAUTION: Risk of Danger.

Read complete instructions prior to 

installationand operation of the unit.

CAUTION: 

Risk of electric shock.

DIMENSIONS  In inches (mm)

Note: Recommended minimum clearance (behind the panel) for mounting clip installation is 2.15" (54.6) H x 3.00" (76.2) W.

C

US LISTED

UL

R

51EB

IND. CONT. EQ.

.13 (3.3)

(43.4)

1.71

2.95 (74.9)

SEL

.15 (3.8)

1.54 (39.1)

RST

 (68     )

+.025 

-.000 

+8 

-0

1.29 (32.8)

2.68

-.000 

1.30 

 (33       )

-0

+6 

+.024 

Summary of Contents for RFMP Series













Reviews: