Identification of Parts
Thank you for purchasing this Velbon product. Please study this instruction manual carefully before use.
Camera screw
QB-3
Stability improves when the
tripod legs are opened, however
the role of these legs is to assist
the monopod, so please ensure you hold
your camera firmly when attached. Do not
step on the legs as this can cause damage.
When moving from place to
place, please ensure you
detach your camera from the
monopod, otherwise movement
could cause your camera to
detach and fall.
Head Locking Lever
Leg Locking Lever
Monopod
(inverted)
Tripod Leg Section
Column Lock
Rubber Foot for Monopod
Rubber Foot
Leg Angle Selector
Direct Contact Pipe
(Twist-lock system)
The twist-lock system enables
easy set-up as well as excellent
rigidity when extended.
To extend tripod legs,
twist anti-clockwise to
unlock, then extend
as required and twist
clockwise to lock.
Specifications
Ball Head
Extended height
Minimum height
Closed length
Diameter of Monopod Tubes
Diameter of Tripod Legs
Monopod
Tripod
Weight
Ideal load
Pole Pod
QHD-41Q
1785mm
605mm
680mm
29/26/23/20mm
21/18mm
4 section
2 section
930g
1500g
Vertical Tilt
Horizontal Panning
Head Locking Lever
Head Locking Lever
Rotate locking lever until quick-shoe (QB-3) can
be removed from the socket.Turn camera screw
clockwise to attach QB-3 to the base of your
camera. Replace QB-3 in socket and lock in
place by rotating locking lever.
2. How to use Ball Head QHD-41Q
1. How to attach camera to QHD-41Q
3-1. How to remove QHD-41Q from Pole Pod
You can freely adjust the angle of your camera,
when the Head Locking Lever is undone. Once
happy with the framing of your shot, tighten the
lever to lock the head in position.
Caution: Please hold onto your camera
when loosening the locking lever, otherwise
it could tip and become damaged.
Should you wish to remove the ball-head from
the pole, tighten the Head Locking Lever and the
Column Lock, then turn the ball-head
anti-clockwise to unscrew.
(it is also possible to attach a different head, as
long as it has a 1/4"-20 thread)
Pole Pod
Manual
Column Lock
※
Please note that the figures quoted above are intended as a guide and may vary slightly due to ongoing product improvements.
Back
Front
