VERMEIREN
Opening up new horizons in mobility
Subject to technical alterations – vD - 2015-08
Lyna II + wheels
Additional to the manual Lyna II, Lindsey.
The walking frame Lyna II can be changed to a
rollator by mounting four wheels under the walking
frame.
1. Technical Specifications
Description Dimensions
Total width
540 mm
Total length
570 mm - 600 mm
Maximum height
1000 mm
Minimum height
820 mm
Width (folded)
575 mm
Length (folded)
850 mm - 1020 mm
Height (folded)
120 mm
Distance between
handgrips
495 mm
Weight 3,4
kg
Maximum inclination
forwards
11,5°
Maximum inclination
backwards
7,5°
Maximum inclination
sideways
0°
Maximum user weight
130 kg
Turning diameter
1260 mm
Maximum angle handgrips
0° (not articulating)
3,5° (articulating)
Storage temperature
+5°C - +41°C
We reserve the right to introduce technical changes.
Measurement tol/- 15mm / 1,5 kg / °
2. Check after delivery
Unpack your product and verify if the delivery is
complete. Following items should be included:
Walking frame Lyna II
Wheels (4x)
Manual
Verify your product for transport damage. If
you find any damages after delivery proceed
as follows:
Contact the transporter
Have a list made of any problems
Contact your supplier
3. Safety rules
L
Check that the wheels / tips are
properly mounted to the walking frame.
L
The walking frame is only for indoor use.
4. Mounting / Removing wheels
Mounting wheels:
1. Press on the locking pin with your thumb.
2. Move the lower leg downwards and remove
these completely from the walking frame.
3. Grasp the wheel.
4. Mount the wheel to the walking frame and move
the wheel upwards to the desired height.
5. Check that the locking pin is firmly clicked in one
of the holes and the wheel is secured to the
walking frame.
6. Repeat instructions above for the tree other
wheels.
For removing the wheels and mounting the tips
you can use same instructions.
Summary of Contents for Lyna II
Page 8: ......