background image

1

Bedienungsanleitung ’14 Analogsynthesizer

DE

Vorwort

Planeten, Galaxien, Mythologien, Philosophien - was musste nicht schon alles zur Namensgebung 
von Synthesizern herhalten? Und dann kommt ein Gerät daher, das schlicht und einfach 

’14 Analogsynthesizer

 heißt. Was hat es mit dieser, zugegeben, etwas eigenwilligen Namensgebung 

auf sich?

Geplant war die Veröffentlichung des ’14 Analogsynthesizers bereits für das Jahr 2015. Wir wollten 
unser 25-jähriges Firmenbestehen und damit einhergehend 14 Jahre Wiedereinführung der Marke 
VERMONA feiern. Als Krönung des Ganzen hatten wir die Idee für ein ganz besonderes Instrument: 
Ein  einzig  nach  musikalischen  Gesichtspunkten  konzipierter  Analogsynthesizer,  gefertigt  nach 
höchsten  Qualitätsansprüchen.  Eben  so,  wie  wir  es  als  Teil  des  Musikwinkels  Deutschlands  mit 

seiner langen Historie im traditionellen Musikinstrumenten-Handwerk gewöhnt sind. Mit Eifer und 
Herzblut machten wir uns an die Verwirklichung des schlicht ’14

 getauften Projekts.

Bernd  Haller,  Firmenmitbegründer  und  Entwickler  zahlreicher  VERMONA  Produkte,  verstarb 
unerwartet  im  Februar  2015.  Schweren  Herzens  entschlossen  wir,  das  Synthesizer-Projekt,  an 
dessen Umsetzung er entscheidend beteiligt war, für unbestimmte Zeit beiseite zu legen.

Mit Verspätung aber nicht ohne Stolz vollendeten wir die Entwicklung des ’14 Analogsynthesizers 
und stellen das Instrument in unserer kleinen Manufaktur in liebevoller Handarbeit her. Was als 
ambitionierter  Gedanke  begann,  verwandelte  sich  für  uns  zu  einem  sehr  emotionalen  Teil  der 
neueren VERMONA Geschichte.

Danke, dass Du dich für dieses Instrument entschieden hast. Wir sind uns sicher, dass Du mit ihm 

viele kreative und schöne Stunden erleben wirst.

Deine VERMONA Mannschaft aus der

 

Elektroakustischen Manufaktur, Erlbach

 

Summary of Contents for '14 Analogsynthesizer













































































Reviews: