Vertex Standard VX-1210 Service Manual Download

Page: 1 / 76

VX-1210

Service Manual

Introduction

This manual provides technical information necessary for servicing the VX-1210 Transceiver.
Servicing this equipment requires expertise in handling surface-mount chip components. Attempts by non-qualified persons to

service this equipment may result in permanent damage not covered by the warranty, and may be illegal in some countries.

Two PCB layout diagrams are provided for each double-sided circuit board in the transceiver. Each side of thr board is referred

to by the type of the majority of components installed on that side (“leaded” or “chip-only”). In most cases one side has only chip
components, and the other has either a mixture of both chip and leaded components (trimmers, coils, electrolytic capacitors, ICs,
etc.), or leaded components only.

While we believe the technical information in this manual to be correct, VERTEX STANDARD assumes no liability for damage

that may occur as a result of typographical or other errors that may be present. Your cooperation in pointing out any inconsistencies
in the technical information would be appreciated.

Operating Manual Reprint ............................. 2
Specifications .................................................. 10
Installation Manual Reprint ......................... 11

SEL-1200 (Option) ........................................................... 11
ATU-1210 (Option) ......................................................... 12
DSV-1200 (Option).......................................................... 14

Exploded View & Miscellaneous Parts ...... 15
Block Diagram................................................. 17
Interconnection Diagram .............................. 18
Circuit Description ........................................ 19
Alignment ........................................................ 21

Contents

Board Unit (Schematics, Layouts & Parts)

MAIN Unit....................................................................29
CNTL Unit ....................................................................45
PA Unit..........................................................................57
Display Unit .................................................................65
Connection Unit ...........................................................67
MIC-CONN Unit .........................................................68
BATT-CONN Unit .......................................................69
TUNER Unit (ATU-1210: Option) .............................71
SELCALL Unit (SEL-1200: Option) ...........................74

2001 VERTEX STANDARD CO., LTD. Printed in Japan

VERTEX STANDARD CO., LTD.

4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan

VERTEX STANDARD

US Headquarters

17210 Edwards Rd., Cerritos, CA 90703, U.S.A.

International Division

8350 N.W. 52nd Terrace, Suite 201, Miami, FL 33166, U.S.A.

YAESU EUROPE B.V.

P.O. Box 75525, 1118 ZN Schiphol, The Netherlands

YAESU UK LTD.

Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.