background image

08/2010 

Rev. 2/7/2018 

   DGS-A, MANUAL 

 

Copyright 2018   Vestil Manufacturing Corp.  

 

 

Page 1 of 8 

 

 

 
 
  

 

 

 

 

 

 

 

DGS-A, DGD-A, & DGS-AG Fork-Mounted Drum Lifters

 

Use and Maintenance Manual

 

 

 

 
 
 
 

                            

       

 

DGS-A

                                                                        

DGD-A 

 
 

 

DGS-AG 

 

                          

                          

 

Receiving instructions: 

 

  After delivery, remove the packaging from the product. Inspect the product closely to determine whether 
it sustained damage during transport. If damage is discovered, record a complete description of it on the 
bill of lading. If the product is undamaged, discard the packaging.

 

 

NOTE:

 

     The end-user is solely responsible for confirming that product design, installation, use, and maintenance 
comply with laws, regulations, codes, and mandatory standards applied where the product is used.

 

 

Table of Contents 

 

Signal Words…………………………............................................................................................................... 2 
Hazards of Improper Use………….................................................................................................................. 2 
DGS-A Parts Diagram, Bill of Materials, and Specifications……………………………………………………… 3 
DGS-AG Parts Diagram, Bill of Materials, and Specifications……………………………………………………. 4 
DGD-A Parts Diagram, Bill of Materials, and Specifications……………………………………………………… 5 
Using the Drum Carrier………………………………………...……………………………………………………... 6 
Inspections & Maintenance…….………………………………………………………………………………… 6 – 7 
Labeling Diagram……………………………………………………………………………………………………… 7 
Limited Warranty………………………………………………………………………………………………………. 8 

Vestil Manufacturing Corp. 

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 

Telephone: (260) 665-7586  -or-  Toll Free (800) 348-0868 

Fax: (260) 665-1339 

www.vestilmfg.com

             Email: 

info@vestil.com

 

Summary of Contents for DGS-A









Reviews: