Rev. 10/3/2019
PEL, MANUAL
Copyright 2018 Vestil Manufacturing Corp.
Page 1 of 17
PEL-Series Pallet Handlers
Instruction Manual
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging and
maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it
sustained damage during transport.
If damage is discovered during the inspection, immediately record a
complete description of the damage on the bill of lading
. If the product is undamaged, discard the packaging.
Notes:
1) Compliance with laws, regulations, codes, and mandatory standards enforced in the location where the product is
used
is exclusively the responsibility of the end-user.
2) VESTIL is
not liable
for any injury or property damage that occurs as a consequence of failing to apply either:
a) Instructions in this manual; or b) information provided on product labels.
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
Table of Contents:
Signal Words……………………………………………..……………………………………………………………..………….. 2
Safe Use Recommendations……………..……………………………………………..…………………………..…….……… 2
Specifications…………………………………..…………………………………………………………..………………………. 3
FIG. 1: PEL-88 & PEL-100 exploded parts diagram & bill of materials…………..……………………………..………...
4, 5
FIG. 2: PEL-88-A & PEL-100-A exploded parts diagram & bill of materials………………………………………………… 6
FIG. 3: PEL-400-57 & PEL-400-72 exploded parts diagram & bill of materials………...………………….……………..
7, 8
FIG. 4: PEL-100-A-SWA exploded parts diagram and bill of materials………………………………………………………
9
Accessory carriage attachments………………………………………………………………………………………………… 10
Installing accessory carriage attachments……………………………………………………………………………………... 10
FIG. 5: Electrical circuit diagram………………………………………………………………………………………………… 11
Operation Instructions……………………………………………………………………………………………………………. 12
Chain tension adjustment procedure (PEL-88 & PEL-100)………………………………………………..………………… 12
Chain tension adjustment procedure (PEL-400-57 & PEL-400-72)…………………………………………………………. 13
Battery Charger Operation………………………………………………………………………………………………………. 14
Inspections & Maintenance……………………………………………………………………………………………………… 15
Labeling Diagram…………….....………………………………………………………………………………………………… 16
Limited Warranty…...…………………………………………………………………………………………………………..…. 17
Aluminum models
(PEL-88-A & PEL-100-A)
Steel models
(PEL-88, PEL-100, & PEL-400)
