MODEL NUMBER:
400H – HARDMOUNT AIR COMPRESSOR
450H – HARDMOUNT AIR COMPRESSOR
IMPORTANT:
It is essential that you and any
other operator of this product read
and understand the contents of
this manual before installing and
using this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
400H
450H
USER MANUAL
IMPORTANT SAFETY INSTRUCTIONS
CAUTION - To reduce risk of electrical
shock or electrocution:
Do not disassemble. Do not attempt repairs or
modifications. Refer to qualified service agencies
for all service and repairs.
•
Do not use this product in or area where it can fall
or be pulled into water or other liquids.
•
Do not reach for this product if it has fallen into liquid.
•
Use this compressor with 12-volt DC systems only.
•
This product should never be left unattended
during use.
WARNING - To prevent injury:
•
Never allow children to operate this compressor.
Close supervision is necessary when this
compressor is being used near children.
•
This compressor will become very HOT during
and immediately after use. Do not touch any part
of this compressor with bare hands other than the
ON/OFF switch, during and immediately after use.
•
Do not use this product near flames or explosive
materials or where aerosol products are being used.
•
Do not operate this product where oxygen is
being administered.
•
Do not pump anything other than atmospheric air.
•
Never use this product while sleepy or drowsy.
•
Do not use any tools or attachments without first
determining maximum air pressure for that tool or
attachment.
•
Never point any air nozzle or air sprayer toward
another person or any part of the body.
•
This air compressor is equipped with Automatic Reset
Thermal Protector, and can automatically restart after the
thermal protector resets. Always cut off power source
when thermal protector becomes activated.
•
Wear safety glasses or goggles when operating
this product.
•
Use only in well ventilated areas.
