VICON
INSTRUCTIONS FOR
INSTALLATION AND OPERATION
NOTES
I
SHEET
REV.
SEC.
SUPERSEDES
X662 893 6
MODEL
MINIATURE CEILING HOUSING
INTRODUCTION
The information in this manual covers the installation
a viewing window. The window is constructed of clear
of the
Ceiling Housing. The
acrylic plastic. A special tool is provided for opening
installation of this equipment must be in conformance
and closing the tamperproof screw. Electrical
with national, state, and local electrical codes.
tions are made through one of five knock-outs.
Model
is a miniature indoor camera
sure, constructed of two major parts: a steel upper
housing, into which the camera and lens
mounted,
and a tamperproof hinged lower housing or cover with
This compact unit is designed for very shallow ceiling
clearances. The housing accepts small CCD cameras
with either fixed-focal-length manual or
lenses.
2. INSTALLATION
WARNING: Read
ALL
instructions
A
COMPLETELY before installing this unit. Fail-
ure to do so may result in costly installation
mistakes or personal injury to installers or other
persons.
CAUTION:
Total weight of camera/lens assembly
A
should not exceed 10 pounds (4.5 kg).
The
is designed to be mounted to most types
of ceilings.
in a suspended ceiling requires
model
an adjustable ceiling panel
which allows 360
position adjustment capability
for the
housing.
may
also be mounted in a panel supplied by the installer, but
the panel must be of a material (wood or metal)
ciently strong to support the combined weight of the
housing and camera/lens assembly.
weighs 6.0 lb (2.7 kg). Conventional ceiling tile and
sheet rock will not support this housing.
NOTE: For installation to a suspended ceiling,
see the instructions included with model
2.1 Ceiling Preparation
Be certain that the area directly above the selected
2.
Video, sync, and power cables must be routed near
location is clear of obstacles (such as steel beams,
the housing opening.
headers, pipes, electrical wiring, etc.) which would
interfere with the mounting of the housing. The
requires 7 inches (17.8 cm) of clear
space.
WARNING: TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR
MOISTURE.
subject to change without notice.
1993 Vicon Industries
rights reserved.
number
and its logo are registered trademarks of
INDUSTRIES
INC. 525 BROAD HOLLOW ROAD, MELVILLE, N.Y. 11747 TEL:
FAX: 516-293-2627
TOLL FREE: l-600445-91 16
(OUTSIDE OF NEW YORK)
