background image

Stinger Pro II

Users Guide

Features

• 

Easy installation

• 

Captures still images up to 704x576 (4CIF) and 16.8 million colors

• 

Captures video up to 640x480 (25 fps on PAL or 30 fps on NTSC)

• 

Full screen video with direct draw graphic adapters

• 

Drag-and-drop videos and stills into any application

Packing list

StingerPro II video board

The CD containing:

 

Drivers for Windows 3.11, 95/98/2000, and NT 4.0

 

Videum Capture application to record audio and video clips, still images, animations or to set up a webcam

 

Third-Party Application Software, in full or trial version including Microsoft NetMeeting & RealPlayer G2.

System Requirements

 

120 MHz Pentium® or faster

 

one free PCI slot

 

minimum 16MB RAM (32 or 64MB recommended)

 

Windows® 3.11, 95, 98, 2000 or NT 4.0

 

VGA display with at least 16-bit color

Installing the Stinger Pro II Video Board

Tools required: you will need a screwdriver to complete the installation. You should also wear an antistatic strap

when installing any expansion board in your computer

Caution: Electrostatic discharge can cause damage to your computer circuitry, which can be followed by complete or intermittent

failures. At a minimum, touch a piece of grounded metal (like your computer chassis) to discharge any static electricity before

starting the installation.

Hardware Installation

1.

 

Turn off the computer and all peripheral devices and unplug the computer from the wall outlet.

2.

 

Remove the cover of the computer so you have access to the open slots.

3.

 

Find an available PCI slot inside your computer.

4.

 

Remove the protective slot cover from the back of the computer using a screwdriver. Save the screw, you

will use later it to secure the board. Save the slot cover you removed for later use.

Reviews: