1
2
3
4
2
1
5
6
Use the included small Allen wrench to remove the three
screws on the side of the deck.
Use the included large Allen wrench to remove the two
screws on the kickstand. Then, remove the kickstand.
TIP:
Lay the scooter on its side before removing the
kickstand, or ask an adult to hold the unit upright.
Use the small Allen wrench to unscrew
and remove the battery plate.
Lift off the deck.
Carefully disconnect the battery from the internal wiring by
pressing in the clasp on the connector and pulling apart.
Then, lift out the battery.
On the other side of the deck, remove the
remaining screw with the small Allen wrench.
VR 550E
ELECTRIC SCOOTER
1
2
3
1
2
NOTE: BEFORE BEGINNING, ENSURE THE UNIT IS TURNED OFF.
IMPORTANT:
An ADULT must make all repairs. Thoroughly inspect all parts after making modifications. DO NOT RIDE until
you are sure the proper repairs have been made and the unit is assembled according to the manufacturer’s specifications.
If you are unsure of any repairs, contact consumer service.
