Step 1a:
Loosen the (4) outer bolts slightly so
as to allow for the Holster body to
slide into the gap between the bolt
heads and the leg bars.
• Remove bolts, washers and
locking washers from the three “X”
connectors.
• Remove paper washers and begin
assembling the “X” connectors and
legs.
• Please Note: Top, Middle & Bottom
“X” connectors must be assembled
simultaneously.
• Assemble cart by inserting the three “X” connectors into leg
ends and install bolts and washers in the same order they were
removed from “X” connectors.
• While assembling, only finger-tighten bolts to allow for
adjustment in cart. Otherwise it can be difficult to get all the
bolts inserted.
• Screw in Standard Rubber Wheels to rear Cart Legs and the
Locking Rubber Wheels to the front Cart Legs.
• Once Cart is assembled, flip cart over so that bolts are exposed.
ENGLISH
SET UP
Model #s RL-K17F1M4 / RL-W20D1L5-1 / Laguna
SIGNATURE SERIES
GOURMET
Parts for Assembly:
3 pcs. - “X” Leg Connectors
A
B
C
I
J
F
H
K
L
1 pc. - Electric Starter
Holster
M
E
2 pcs. - Side Shelves
N
4 pcs. - Cart Legs
1 pc. - Charcoal Grate
1 pc. - Fire Bowl
1 pc. -
Top Flip Grate
1 pc. - Wood Handle
1 pc. - Top Vent
D
Grate Lifting Tool
1 pc. - Kamado Grill
G
1 pc. -
Cast Iron Grate
Cooking Stone &
Bracket
Grill Light
Step 1: Cart Assembly
STEP 1
STEP 1
Shown here is
the bottom of the
cart, flipped upside down
Step 1b:
With opening of Holster facing the
front of the cart (the Locking Wheels)
slide.
Step 1c:
Slide Holster back into place.
Step 1d:
Using provided T-Handle Wrench,
tighten bolts again through hole
openings in bottom of Holster.
• Once Holster is secure, flip cart back over to proper position
so that it is resting on Wheels. Continue Grill Assembly.
Tools Included:
T-Handle Wrench
Flat Wrench
Box Wrench:
For shelf assembly
G
*
1 pc. -
Bottom Flip Grate
*Laguna Only
