CELLULAR SHADES |
Simplicity
Rechargeable Motorization
Quick Start Guide
Your shade has come pre-programmed from the factory. Follow these easy steps to get started.
2. Mount the shade.
3. Your shade is now ready!
Select the programmed channel and use the
UP and DOWN arrows to operate the shade.
1. Connect the motor and battery
in the headrail (as shown).
Connect
For more in depth motorization programming instructions, please visit vistaproducts.com/guides
V
ista
Setting/Using a Favorite Position
Make sure there is only one shade programmed to the channel when setting a Favorite position.
If more than one shade is set, please see UNLINK A SHADE in the Simplicity guide at vistaproducts.com/guides.
1. Using the UP and DOWN arrows,
move the shade to the desired
Favorite position.
2. To save the Favorite position, hold the
LIMIT button and hold the UP button at the
same time. Release after a series of short beeps.
3. Press the STOP/FAVORITE button to
move the shade to the set Favorite position.
NOTE:
Make sure shade is fully stopped
before using the Favorite position.
