background image

 

 

 

 

Motorized Projection Screen Projection Screen Screen Screen

Instruction Manual

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371-5654

  - -

Mod Projection Screenel: PS-E-100E PS E-100E 100E-100E

 

 

Tools Required:  Required Projection Screen: PS-E-100E

phillips screwdriver, drill

 

Package Con Screenten Screents Required: 

1

Scan the QR code with your mobile device or follow the link 
to helpful videos and specifications related to this product.

-

- -

https Required: : PS-E-100E//vivo us Required: .com/prod Projection Screenucts Required: /ps Required:  e 100e

Electric Projection Screen Unit 

Remote Control

Remote Control

Wall Mount Caddy

To increase screen life and avoid damage, be sure to 
retract the screen when not in use.

NOTE: Hooks not included

Summary of Contents for PS-E-100E

Page 1: ...ewdriver drill Package Con Screenten Screents Required 1 Scan the QR code with your mobile device or follow the link to helpful videos and specifications related to this product https Required PS E 100E vivo us Required com prod Projection Screenucts Required ps Required e 100e Electric Projection Screen Unit Remote Control Remote Control Wall Mount Caddy To increase screen life and avoid damage b...

Page 2: ...uds If anchors are needed press anchors into holes first and insert screws into anchors Screw heads should be spaced about 1 4 from the wall Carefully line up mounting holes on projector screen with screw heads and hang in place making sure slots are fully seated over screw heads Step 1 Step 2a 2 Ceiling Installation Insert hooks not included into drilled holes and tighten nuts with a wrench until...

Page 3: ...en remote memory press and hold the stop button on the wall control unit until two beeps sound and continue holding until an additional three beeps sound Step 2 Press and hold the button again until two beeps sound and then press any button on the remote you would like paired with the screen Step 2 To lower the screen press the down arrow button on the remote or wall unit When the screen has reach...

Page 4: ...eeng Con Screentact us Required at PS E 100E Last updated 4 27 18 1 Remote does not respond Step 1 Check if battery is low and replace if necessary The remote uses a 23A 12V battery Step 2 If changing the battery does not work reset the wall control unit Press and hold the stop button Two beeps will sound after 5 seconds continue holding until three beeps sound Press and hold the button again unti...

Reviews: