VIZIT-ML400
VIZIT-ML400 -40
VIZIT-ML400 -50
OPERATING INSTRUCTION
VIZIT-ML400
x
VIZIT-ML400
has degaussing module sealed together with electromagnet coil.
VIZIT-ML400
VIZIT-ML400 -40
VIZIT-ML400 -50
SPECIFICATIONS
VDC
9...15
kg
400 ± 60
W
7.2
kg
VIZIT-ML400
VIZIT-ML400 -40
8
VIZIT-ML400 -50
OPERATING CONDITIONS
-40C
+45C
98%
25C
PARTS LIST
SAFETY INSTRUCTIONS
15 VDC
:
M
M
M
M-
M-x
M
M
M
mm
M
2.5
M
2.
M
3.0
CAUTION
Electromagnetic lock
is intended
doors (30 to 50 mm thick)
The lock is mounted inside the building on a door opening outwards. The lock sh
be used together with a
door closer.
The following versions are available:
-
;
-
;
-
.
Operating voltage,
:
Holding force,
(U=12V):
Power consumption,
(U=12V):
Dimensions,
:
Weight,
:
-
-
-
Ambient temperature range:
up to
Relative humidity of air:
up to
at
.
The lock does not contain voltage above
.
Do not make any connections or repair when the power is on.
Handle the equipment with care. Damage
the mating surface of magnet or armature plate may reduce
locking efficiency.
all
to
to lock
as part of access control
systems.
For qualified installation, wiring and servicing refer to technical and commercial partners of VIZIT TM. The list of
companies is given on VIZIT.EU (
.
http://vizit.eu/eurounion/)
INSTALLATION
1-3
4
The lock shall be installed inside the building according to directions on Figures
The armature plate is fixed on the door. The electromagnet is fixed on the door frame opposite to the armature plate.
The electromagnet’s work surface is shown on Figure .
To ensure maximum holding force, the armature plate shall be fixed as close to the door edge as possible, taking into
account the electromagnet’s position.
Note: It is more convenient to make markings for the electromagnet and armature plate installation, if the door is
closed.
.
Title
VIZIT-ML400 -40
M
VIZIT-ML400 -50
M
Electromagnet
Armature Plate
Mounting Kit 1 (angle bar 40х40 мм)
Mounting Kit 2 (angle bar 50х50 мм)
Mounting Kit (for armature plate mounting)
1
1
1
1
1
1
Package
Operating instruction
-
1
1
1
1
1
VIZIT-ML400M
1
1
1
-
-
1
1
1
-
Mounting Kit 3 (plate bar)
1
-
-
Lock parts
Electromagnet
Armature plate
Width
Height
Depth
225
55
35
167
55
12
www.
201 -
Operating Instruction VIZIT-ML400M-x (revision
6 06)
vizit.eu
1 3
/
