Installation and Operating Manual
USB Charger Panel S
No. 1297
The USB Charger Panel S is equipped with 2 USB charging jacks with a
maximum charging current of 2.5 A, each, for appliances which can be
charged via USB, such as smartphones or tablets. It is designed for 12 V or
24 V DC supply voltage.
Please read the manual including the safety regulations completely
prior to starting installation and use of the unit.
Operation:
As soon as 12 V or 24 V are supplied, the unit is ready for use without
any further action.
Installation:
A hole of at least 25 mm is required for installation. The mounting
depth is 38 mm from the surface of the furniture. The hole for insertion
of the electronic system is located exactly in the middle of the front
panel.
Connection:
The connection must be effected according to the valid regulations and
standards.
The supply must be protected by a 5 A fuse.
The supply is to be effected at a 12 V or 24 V board mains.
Red Wire Plus
Black Wire Minus
Cleaning:
We recommend to use a damp microfibre cloth with pure water or, if
required, with water with a few soap.
Never use solvents, aggressive household cleaners, and scratching
or abrasive agents or objects for cleaning.
Delivery Scope:
1 Pc. USB Charger Panel S
4 Pcs. Fastening Screws
1 Pc. Operating Manual