background image

C-700 Series

Digital Locking

Modular Assembly Manual

1

Slide cylinder into assembly holder.

Loosen all screws

 

on bridge with 

flathead screwdriver.

5

Tighten screw

 

of connect body set on 

Reader Knob part and Inner Knob part 

with Phillips screwdriver.

Length Adjustment

Parts list for Tool Kit

2

6

Assemble three parts: Reader Knob 

part, Cam, and Inner Knob part.

3

Take apart cylinder into three sections: 

Reader Knob part, Cam, and Inner Knob 

part.

7

4

Select a specified length connect body 

set

 

or combination with screws

 

for 

Reader Knob part and Inner Knob part.

 

Please refer to Length Assembly Diagram 

for connect body set selection.

 

There is size indicator on the bridge

8

Tighten bridge screws

 

with flathead 

screwdriver.

 

Connect Bodies and pins:

  5mm x 12, 10mm x 12, and 15mm x 4

 

Bridges: 30/35 x 6, 35/35 x 6, 35/40 x 

6, 40/40 x 6, 40/45 x 3, and 45/45 x 3

 

Connect Body Set Screws: 35mm x 

18, 40mm x 18, and 45mm x 6

 

Bridge Screws: 50pcs

 

Reader Knob Screws: 50pcs

 

Steel Balls: 50pcs

 

Anti-pulling Pins: 20pcs

 

Anti-drilling Pins: 20pcs

 

Seal Rings inside Reader Knob: 10pcs

 

Assembly Holder: 1pc

 

Knob Cap Assembly Tool: 1pc

Slightly turn reader knob and inner knob 

to fit into cam.

Put steel balls

 

back to the original 

position.

Select appropriate bridge and assemble it.

WFE TECHNOLOGY CORPORATION

Tel: 886-4-22300362    Fax: 886-4-22377995

No. 16 Ke Yuan 2nd Rd., Central Taiwan Science Park 

Taichung city 407, Taiwan.

E-mail: info@waferlock.com

 

body

 

pin

Remove bridge

 

from the top of 

cylinder carefully. There are two steel 

balls

 

in between. Please keep steel 

balls

 

in a container to prevent from 

loss during the length adjustment.

Reader Knob

Cam

Inner Knob

Reviews: