WARRIOR 68113 Owner'S Manual & Safety Instructions Download

Page: 1 / 4

ITEM 68113 68990

Visit our website at: http://www.harborfreight.com

Email our technical support at: tech@harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

2011 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product

described herein. Tools required for assembly and service may not be included.

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-800-444-3353 as soon as possible.

Save This Manual

Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual

near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

Owner’s Manual & Safety Instructions

14 PC. BI-METAL

HOLE SAW SET

3/4″, 7/8″, 1-1/8″, 1-3/8″, 1-1/2″, 1-3/4″,

2″, 2-1/8″, 2-1/4″, 2-1/2″ Hole Saws
Spare Pilot Drill
Large Mandrel
Small Mandrel with Medium Adapter
Blow Molded Case

Summary of Contents for 68113

Page 1: ...cribed herein Tools required for assembly and service may not be included When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 800 444 335...

Page 2: ...all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by t...

Page 3: ...ocking Collar B Thread Hole Saw onto Collar Thread until the Locking Pins align with the Holes in the Saw It just needs to align it does not need to be tight Hole Saw Collar Thread Align pins with hol...

Page 4: ...facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent...