Water Witch, Inc. 10744 Rockvill Street, Suite 103 Santee, California 92071
1-800-654-4783 e-mail: info@WaterWitchInc.com www.WaterWitchInc.com
•
No moving parts & no electrolysis
•
Impermeable to all bilge substances
•
Activates when water touches lower sensor
•
Will not interfere with other electronics
•
Will not pump a bilge full of pure gas, diesel or oil
•
Easy to install and mounts at any angle
•
30” lead of 16 gauge tinned copper wire
•
7 year unbeatable limited warranty
•
Exceeds both United States Coast Guard and U.L. Standards
FEATURES & BENEFITS
Power Required: 12Vdc (model 217, 230)
24/32Vdc (model 230-24)
Power used:
.006 Amps
Size:
2
⅝
”W x1
⅝
”H x 1
⅝
”D
Weight: 4
ounces
Delay on:
6-8 seconds
Delay off:
15 seconds
Capacity:
217
10 amps @ 12 Vdc
230
20 amps @ 12 Vdc
230-24 15 amps @ 24 Vdc
SPECIFICATIONS
Instead of an unreliable and short-lived mechanical float switch, why not use the original Electronic
Bilge Pump Switch? The Water Witch 217, 230 or 230-24 is a submersible electronic bilge pump
switch allows boat owners to forever rid themselves of the archaic outdated float switch. The 230 has
no moving parts, requires no adjustments and works in an oily bilge. This eliminates the chance of
your battery dying or your pump burning out because of a failed mechanical switch. Water need only
touch the lower sensor for 6-8 seconds to activate the switch. The delay eliminates pump stutter and
once water has left the sensor, the switch continues to run the pump an additional 14 seconds to
clear the output hose. Temperature, humidity or electrical noise will not effect this switch, nor will it
interfere with other electronics. This switch comes with an unprecedented 7 year limited warranty
and is in use by both the Canadian and U.S. Coast Guards. If it's good enough for them,......why not
for you?
Models 217, 230, 230-24
Electronic Bilge Pump Switch
