©2019 Water Pik, Inc.
WP-600 Series
QUICK START GUIDE
First Use
1
Fill reservoir with warm
water and replace it
firmly on the base.
Insert tip firmly until it
clicks into place.
Turn pressure to high, point
tip into sink, turn power on
and water switch to
ON
until water flows. Turn
OFF
.
This device is only compatible with voltages of 120VAC, 60Hz
ON
OFF
• 2
• 4 • 6 • 8
• 10
Replace
Fill
ON
OFF
Insert
ON
OF
F
ON
OFF
• 2
• 4 • 6 • 8
• 10
Power
ON
Water
ON
High
Water Floss
2
ON
OFF
• 2
• 4 • 6 • 8 •
10
Power
ON
Low
Massage
Floss
• 2
• 4 •
6 • 8 • 1
0
Lean over sink. Close lips
enough to prevent splashing,
while still allowing water to
flow from mouth into sink.
Aim water at the gumline at
a 90 degree angle. Follow the
gumline and pause briefly
between teeth.
With power
OFF
and water
switch in
OFF
position, place
tip in mouth. Turn power
ON
.
Turn water switch to
ON
.
Visit
waterpik.com/welcomeWF
Register your product and
receive over
$50
in savings.
waterpik.com/registration
