Aluminized Steel Insulation
Cap with 1 in. (25 mm) Thick
Insulation Blanket
High Performance
Mineral Insulation
Sinuated
Element
Wire
High Emissivity
Coating
3 in. (76 mm) Wide
Replaceable Stainless
Steel Emitter
Stainless
Steel Case
RAYMAX
®
1330
RAYMAX
®
1330—
Features Specially
Insulated Heater
Emitter Strips for
Higher Performance
The RAYMAX
®
1330 is the only radiant heater that features
specially insulated heater emitter strips for higher performance.
Watlow developed a unique compacted mineral insulation to
electrically insulate the element wire, with a result of superior heat
transfer and higher operating capabilities.
Because of its rugged stainless steel construction, the RAYMAX
1330 will last longer. And this relatively new heater features a high
emissivity black coating and a uniform, full surface heat source for
better efficiency.
© 2005 Watlow Electric Manufacturing Company
Printed in the USA on Recycled Paper, 15% Postconsumer Waste
Features and Benefits
Field replaceable emitter strips
•
Allow you to avoid the cost of buying a whole new
radiant heater
Rugged metal construction
•
Protects the heater from contaminants
No reflectors
•
No cleaning or replacing
No fragile glass or ceramic elements
•
No worries involved
One-inch thick backside insulation
•
Provides better heating efficiency
12001 Lackland Road
St. Louis, Missouri 63146 USA
Phone: +1 (314) 878-4600
FAX: +1 (314) 878-6814
Internet: www.watlow.com
e-mail: info@watlow.com
STL-1330-0805
Applications
•
Thermoforming plastics and composites
•
Circuit board soldering
•
Heat shrinking of plastic
•
Terminal box
•
Thermowell
•
Mounting studs
•
Thermocouple welded to hot face
