background image

Installation Instructions

Please read all instructions before installing

DESCRIPTION AND OPERATION 

The RT-200 is an astronomic time clock that controls the connected light or fan 

either manually or through user programmed times.  
Upon installation the user enters the correct longitude/latitude coordinates, 

date, and local time. (See SETUP.) This ensures that once the schedules are 

programmed, the load turns ON/OFF at the correct local times. 

Lighted Switch

To help locate the switch button in a dark room, an amber LED illuminates the 

ON/OFF button while the controlled load is OFF. When the load is ON, the LED is 

OFF. 

INSTALLATION & WIRING

WARNING

Disconnect power at the circuit breaker

before installing this product. 

1.   Prepare the switch box

  After the power is turned OFF at 

the circuit breaker box, remove 

the existing wall plate and 

mounting screws. Pull the old 

switch from the wall box. 

2.   Identify the type of circuit

  In a single pole circuit, two single 

wires connect to two screws on 

the existing switch. A ground 

wire may also be present and 

connected to a ground terminal 

on the old switch. A neutral wire 

should also be present in the 

wall box. 

SPECIFICATIONS

Voltage…………………….. ....................................................... 120VAC, 60Hz

Load (Single Pole)

 @120VAC…………. .........................0-800W tungsten or ballast, 1/6HP

Environment……………….. ................................................ Indoor Use Only

  Operating Temperature…… ......................32˚ to 131˚ F (0˚ to 50˚ C)

 Humidity………………….. ............................... 95% RH, non-condensing

Tools Needed

  Insulated Screwdriver

  Wire Strippers

ONLINE LONGITUDE/LATITUDE  

LOCATOR TOOL - GO TO  

www.wattstopper.com/RT-200

Santa Clara, CA 95050

www.wattstopper.com

RT-200

Astronomical

Time Switch

TOP

IND

OOR

 USE

 ON

LY

Green > GROUND

Terminal

Black > HOT (power

from circuit box)

Red > LOAD (power

to lamp or fan)

White > NEUTRAL

Industry standard 
switch cover plate
(not provided)

Summary of Contents for RT-200













Reviews: