I
Bluetooth not connected - Bluetooth indicator light flashes quickly
Bluetooth connected - Bluetooth indicator light is active
Charging - The battery status lights indicate your charge level
Charged - All battery status lights are active
Instructions
LED Light Indicator Pattern
1
2
3
4
5
5
Enter TWS pairing mode with another
Amped Speaker - Long press for 2 seconds
Redial the last number - Double press
4
3
1
Turn off - Long press 2 seconds to turn off the speaker
Lights on/off - Short press power button
Turn on - Long press for 2 seconds
Forget pairing - Press and hold for 8 seconds
Play / Pause - Short press
Answer call - Short press
End call - Short press
Refuse call - Long press
Reset - Long press for 10 seconds
Disconnect the Bluetooth Pairing - Long press
for 2 seconds
Connect to the last paired device - Long press
for 2 seconds
Switch EQ modes - Double press to switch between
Standard / Bass / 3D
Previous song - Long press for 2 seconds
Volume down - Short press
Volume up - Short press
Next song - Long press for 2 seconds
Technical Specifications
Bluetooth pairing name: Amped Series Large 3S-2450
Battery & Charging
Capacity: 7.2V / 2500mAh
Battery life: 9 hrs
Auto-turn of: within 10 mins of inactivity
Standby time: 180 days
Charge time: 3 - 4 hrs
Charge current: 5V / 1A
Charge method: USB-C input
Durability
IPX rating: IPX7 (floats)
Operating temp: 10°C - 55°C
Input & Control
Input: USB-C (charging), AUX, TF Slot
Cables included: 1x USB-C
Speaker
Driver/s: 1x 50*90mm / 30W
S/N: 82db
Frequency response: 70-20k Hz
EQ Settings: Normal / Bass / 3D
Bluetooth (BT)
Version: 5.0
Chipset: Action 2819+DSP
BT range: <10m/33ft
TWS range: <10m/33ft
BT frequency: 2.4GHz
Mic
Sensitivity: -53.3 (±3) db
Frequency range: 60 Hz - 13 KHz
Range: <50cm/1.6ft
