STEP 1: Connect CyBlock Mini Appliance.
• Connect the mini appliance to your LAN (local area network) as if it were
another computer.
• Connect the right-side LAN port on the mini appliance to a network Hub using
an Ethernet cable.
STEP 2: Connect your computer to the mini appliance.
This step is similar to configuring a single computer to your network. You will need to
configure:
• IP address
• DNS
• Default gateway
Configure your computer.
Record your current IP address information BEFORE making
the changes below, as you will want to change them back after you have successfully
configured the mini appliance.
• From the Start menu on your computer, open
Settings
and click
Network &
Internet
and then
Network and Sharing Center
.
• Under
View your active networks
, click
Local Area Connection
.
• The Local Area Connection Status screen
(Figure 1)
will appear. Click the
Properties
button.
• Select
Internet Protocol (TCP/IP)
(Figure 2)
, and then click the
Properties
button.
• Select
Use the following IP address
(Figure 3)
.
• In the
IP address
field, type “10.40.10.2.”
• In the
Subnet mask
field, type “255.255.255.0.”
• Click
OK
, and then restart your computer.
Connect to the mini appliance browser interface.
When your computer comes back up,
open a browser. In the address bar, type “http://10.40.10.3” and press ENTER. You
can now access the mini appliance through this interface
(Figure 4)
. Enter the following
information to log on:
• Logon:
admin
• Password:
password
Figure 4: CyBlock Logon Screen
Figure 1: Local Area Connection Status
Figure 2: Local Area Connection Properties
Figure 3: Internet Protocol Properties
CyBlock
®
Mini Appliance
| Setup Guide
WAN
LAN
Enterprise-Level Web Filtering and Reporting Hardware
Manage Internet use in your organization
