Wooden 3 Tier Stand 820mm - ref: RN78Assembly Instructions
NORWOOD
COLLECTION
Page 1: ...Wooden 3 Tier Stand 820mm ref RN78 Assembly Instructions NORWOOD COLLECTION...
Page 2: ...Components Recommended cRNS78 x 6 cRNL78 x 2 x1 x24 Whilst a hex bolt key is provided it is far easier to assemble using an electric drill or screwdriver with a 4mm hex fitting...
Page 3: ...with a front bar on one side and a middle bar on the reverse The front bar should be facing upwards for wider trays in kits RN78C RN78M and RN78T For narrower trays the middle bar should be facing up...
Page 4: ...3 Move the assembled frame into position in your store and then tighten all the screws This will allow the unit to sit more squarely on slightly uneven floors...