ASSEMBLY AND INSTALLATION INSTRUCTIONS
Aluminum Conduit Carrier - Model 237
PARTS LIST
•
1- Front Body
•
1- Rear Body Assembly
•
1- Door Assembly
•
1- Door Stop
•
Weatherstripping (bulk)
•
2- "U" Clamps
•
4- Clamp Brackets
TOOLS REQUIRED
·
7/16" Open or Box End Wrench (2)
·
3/8" Open or Box End Wrench
·
Razor knife or scissors
WARNING
This product is only intended for, and only safe for, storing and
transporting tubing, pipe and conduit. Any modifications made
to this product, or use of this product for any other purpose than
its intended use, could create a hazardous condition that can
cause serious personal injury or property damage.
IMPORTANT
BEFORE YOU BEGIN
Read these instructions and
warnings completely before
installation.
BOLT KIT
Bolt Kit #32-0237 is provided with
your Conduit Carrier. Check this
bolt kit to be sure the following
parts are included:
Quan.
Description
4
#12-24 Nylon Lock Nuts
(
black dichromate
)
10
1/4-20 x 3/4" Hex Hd. Bolt
3
1/4-20 x 5/8" Hex Hd. Bolt
13
1/4-20 Nylon Lock Nuts
20
1/4" Flat Washers
