Weiser Powerbolt 2 How To Perform Download

Page: 1 / 3

The latch bolt will extend and retract. The lock will beep and the keypad will

turn green or red.

Green (with 2 beeps): The door has successfully learned the orientation of the

door. Continue to step 3.
Red (with 3 beeps): Make sure the door is unlocked and that you are using a

fresh set of batteries. Repeat step 1.

THE LEADER IN RESIDENTIAL SECURITY

213826 10/17

While the door is open and unlocked, enter the following default

Mastercode to teach the lock the orientation of the door:

1. Press 0-0-0-0.
2. Press

. You will hear one beep.

3. Press 0.
4. Press

Press the button. The door will unlock.

How to Perform the Door Handing Process:

Press the button. The latch bolt will extend to lock.

Enter the default User Code (1-2-3-4).

IMPORTANT:

It is recommended that you replace the default

Mastercode and default User Code with codes of your own.

Programming Video:

https://www.youtube.com/watch?v=eZSwXjcYwAQ

Installation Video:

https://www.youtube.com/watch?v=Aomf7oqslas

Summary of Contents for Powerbolt 2

Page 2: ...ck is unlocked and the door is open Enter your existing Mastercode 1 Enter a new User Code It must be 4 10 digits Press You will hear two beeps if successful If you hear three beeps it was unsuccessful Repeat from step 1 slowly 4 3 2 How to Add a Code Press 1 9 Press You will hear one beep 5 6 ...

Page 3: ... is open Enter your existing Mastercode 1 4 Press You will hear one beep 6 Press You will hear two beeps if successful If you hear three beeps it was unsuccessful Repeat from step 1 slowly 3 Press 3 5 Enter the User Code you wish to delete 7 Test the code While your door is open lock it Enter the User Code then press The door should not unlock ...